Genie Throttle Solenoid 101957GT – S-100 S-105 S-125 S-3200 S-3800 Z-135/70 ZX-135/70 SX-150 SX-180 Engine Speed Control

Save $5

Can't find what you are looking for?
Contact us, we can help you find the part you need.

Price:

$55 USD $60 USD

Chat Now

Share this product

Throttle Solenoid 101957GT – Optimized Product Page Content

Genie Throttle Solenoid 101957GT

🔹 Product Overview

The Throttle Solenoid with Genie Part Numbers 101957 and 101957GT is a critical electro-mechanical component used in the engine speed control system of large Genie Telescopic Boom Lifts (S-Series and SX-Series) and Articulating Boom Lifts (Z/ZX-Series).

This solenoid is responsible for actuating the engine throttle linkage to switch the engine between its high idle (work speed) and low idle (rest/start) settings. It is essential for ensuring the lift runs at the correct RPM to supply adequate hydraulic flow and pressure when performing boom functions, while saving fuel and reducing noise when idling.

Failure of the solenoid (e.g., sticking, failing to pull/push, or coil burnout) results in the engine being stuck at the wrong speed—either high idle (wasting fuel, excess noise) or low idle (inadequate power for lift functions). Replacing the failed unit with the 101957GT restores proper engine RPM control, optimizing performance and fuel efficiency.

🔹 Key Features & Benefits

✅ Engine Speed Control: Critical solenoid that manages the engine throttle to switch between high idle and low idle speeds.
✅ Optimizes Performance: Ensures the engine runs at the required RPM for full hydraulic power during boom functions.
✅ Wide Model Compatibility: Used extensively on high-reach Genie Super-Boom Lifts (S-100 up to SX-180).
✅ Restores Fuel Efficiency: Guarantees the engine returns to low idle when not under load, reducing fuel consumption.
✅ Direct Replacement: High-quality aftermarket or genuine OEM equivalent for Genie Part Number 101957GT.

🔹 Technical Details

Detail	Specification
Genie Part Number	101957GT (Replaces 101957)
Voltage	12 Volts DC (Typical Coil Voltage)
Engine Application	Deutz, Cummins, or similar engines used in high-reach Genie Lifts.
Condition	New Aftermarket or Original Equipment Manufacturer (OEM)
Type	Engine Throttle Actuation Solenoid
Function	Pulls/Pushes the throttle linkage to control the engine’s RPM setting.
Intended Use	Replacement for engine failure to throttle up (stuck at low idle) or failure to throttle down (stuck at high idle).
Installation Note	Requires mechanical linkage adjustment for accurate high and low idle settings.
Warranty	Standard warranty against manufacturing defects (varies by supplier)

🔹 Compatible Genie Models & Applications

The Throttle Solenoid 101957GT is used on the following Genie Lifts equipped with compatible diesel engines. Always verify the part number with your lift’s serial number for precise fitment.

Genie Equipment Series	Specific Compatible Models (Examples)
Telescopic/Super Boom	S-100, S-105, S-125, SX-150, SX-180
Heavy-Duty Lifts	S-3200, S-3800
Articulating Boom Lifts	Z-135/70, ZX-135/70
Common Application	Fixing issues related to engine speed control, critical for optimal hydraulic performance and noise reduction.

Delivery Times

Average Delivery Time is 10-15 days within worldwide.
For overseas delivery Message Us or Call Toll Free at +8618221399269

General Returns: All returns must be requested within 30 days of invoice.
Please note that this refund policy applies to parts purchases only. There are no refunds available for equipment purchases.

General Returns: All return requests must be made within 30 days of the invoice date. Returned merchandise will ONLY be accepted with an issued Return Authorization number and must be returned within 30 days of issuing that Return Authorization number. Special-Order products, electronics, paints, chemicals, lubricants, LPG tanks, and fire extinguishers are non-returnable once ordered. Returned items must be sent to Shanghai RQMACHINE Equipment with freight prepaid.

All returns, except those involving a Shanghai RQMACHINE Equipment order or product error, will be subject to a 25% restocking charge per line item.

Merchandise returned as defective will be thoroughly tested and inspected. For items verified as defective, Shanghai RQMACHINE Equipment will, at its sole discretion, either repair or replace the merchandise at no charge, or issue a full credit for the defective merchandise, including freight. Merchandise returned as defective but found to be working properly will be subject to a testing fee and the 25% restocking charge per line item.

Credit will not be issued for merchandise damaged due to corrosive materials, abuse, alteration, or misuse.

Before returning any merchandise to Shanghai RQMACHINE Equipment, a Return Authorization Number must be obtained from our sales/customer service department.

Your request must include:

Part Number & Description
Return Reason
Order Number

Phone: +8618221399269