Dingli Emergency Cable Knob 10000410 – Scissor Lift Manual Lowering Handle

Save $0

Can't find what you are looking for?
Contact us, we can help you find the part you need.

Price:

$1 USD $1 USD

Chat Now

Share this product

Emergency Cable Knob 10000410 – Optimized Product Page Content

Dingli Emergency Cable Knob 10000410

🔹 Product Overview

The Emergency Cable Knob with Dingli Part Numbers 10000410 and DL-10000410 is a crucial safety component used on various Dingli Scissor Lifts. This component is part of the Emergency Lowering System (ELS), often located in the chassis or on the control box.

The cable knob is typically the manual pull handle that attaches to the release cable (Emergency Lowering Cable). When pulled, it mechanically bypasses the electrical system to release pressure from the hydraulic manifold, allowing the platform to be lowered safely to the ground in the event of a power failure, electronic malfunction, or other emergency where the normal controls are non-responsive.

Because this component is vital for emergency situations, ensuring it is intact, easily accessible, and properly connected is essential for operator and ground personnel safety. This replacement knob restores the functionality and required labeling of the emergency lowering system.

🔹 Key Features & Benefits

✅ Critical Safety Function: Part of the Emergency Lowering System, allowing manual descent in case of power or control failure.
✅ High Visibility: Designed as a distinct knob (often red or yellow) for quick identification during an emergency.
✅ Restores Manual Release: Ensures the mechanical link to the hydraulic dump valve is correctly functional.
✅ Essential for Compliance: Mandatory component for meeting safety regulations regarding emergency lowering procedures.
✅ Direct Replacement: High-quality aftermarket or genuine OEM equivalent for Dingli Part Number 10000410.

🔹 Technical Details

Detail	Specification
Dingli Part Number	10000410
Cross-Reference	Emergency Lowering Handle, ELS Cable Pull Knob, Manual Release Knob
Condition	New Aftermarket or Original Equipment Manufacturer (OEM)
Type	Manual Control Knob / Handle
Function	Used to manually actuate the hydraulic dump valve for emergency platform lowering.
Intended Use	Replacement for broken, missing, or damaged emergency lowering cable handles.
Installation Note	Must be securely fastened to the emergency lowering cable to ensure full travel when pulled. Test the ELS function after installation.
Warranty	Standard warranty against manufacturing defects (verifies by supplier)

🔹 Compatible Dingli Models & Applications

The Emergency Cable Knob 10000410 is widely used on various models of Dingli Scissor Lifts. Always verify the part number with your lift’s serial number for precise fitment.

Dingli Equipment Series	Specific Compatible Models (Examples)
Electric Scissor Lifts	JCPT Series (e.g., JCPT0807, JCPT1008, JCPT1212, JCPT1614)
Slab/Compact Scissor Lifts	(Commonly found near the ground control panel or within the chassis access panel)
Common Application	The visible handle used by ground personnel to perform the emergency lowering procedure.

Delivery Times

Average Delivery Time is 10-15 days within worldwide.
For overseas delivery Message Us or Call Toll Free at +8618221399269

General Returns: All returns must be requested within 30 days of invoice.
Please note that this refund policy applies to parts purchases only. There are no refunds available for equipment purchases.

General Returns: All return requests must be made within 30 days of the invoice date. Returned merchandise will ONLY be accepted with an issued Return Authorization number and must be returned within 30 days of issuing that Return Authorization number. Special-Order products, electronics, paints, chemicals, lubricants, LPG tanks, and fire extinguishers are non-returnable once ordered. Returned items must be sent to Shanghai RQMACHINE Equipment with freight prepaid.

All returns, except those involving a Shanghai RQMACHINE Equipment order or product error, will be subject to a 25% restocking charge per line item.

Merchandise returned as defective will be thoroughly tested and inspected. For items verified as defective, Shanghai RQMACHINE Equipment will, at its sole discretion, either repair or replace the merchandise at no charge, or issue a full credit for the defective merchandise, including freight. Merchandise returned as defective but found to be working properly will be subject to a testing fee and the 25% restocking charge per line item.

Credit will not be issued for merchandise damaged due to corrosive materials, abuse, alteration, or misuse.

Before returning any merchandise to Shanghai RQMACHINE Equipment, a Return Authorization Number must be obtained from our sales/customer service department.

Your request must include:

Part Number & Description
Return Reason
Order Number

Phone: +8618221399269