Genie 101173GT Joystick: Is It Single-Axis or Dual-Axis?
2026-09-13
Genie 101173GT Joystick: Is It Single-Axis or Dual-Axis?
The Genie 101173GT is a dual-axis joystick controller. If you are sourcing a replacement for a Genie boom lift, this is an important detail to confirm before placing an order. However, identifying the joystick as dual-axis is only the first step: the replacement must also match the machine’s electrical connections and control configuration.
JLG’s Online Express catalog describes its AllFleet aftermarket replacement for part number 101173GT as a dual-axis joystick for Genie equipment. This provides a useful reference for buyers checking the controller type.
Genie 101173GT joystick
What Does Dual-Axis Mean?
A single-axis joystick moves along one control axis, typically forward and backward. A dual-axis joystick allows movement along two control axes, typically forward and backward as well as side to side.
The number of axes describes the joystick’s movement capability. It does not, by itself, tell you which machine function each direction operates. Those functions depend on the equipment’s control system and the joystick’s position on the platform control panel.
For this reason, avoid assuming that every dual-axis joystick performs the same functions or can replace another controller with a similar appearance.
How to Confirm the Correct 101173GT Replacement
Start with the machine identification plate. Record the full model and serial number, then check the applicable Genie parts manual for the joystick fitted to that machine.
Next, inspect the existing controller. Photograph its label, connector, wiring and mounting arrangement. Compare these details with the proposed replacement, including connector keying and terminal layout. A matching connector shape alone does not establish electrical compatibility.
If the original controller has previously been replaced, use the machine’s parts documentation alongside the installed part number. This helps avoid repeating an earlier incorrect substitution.
Can Another Genie Joystick Replace 101173GT?
Do not assume interchangeability because two Genie joystick part numbers look similar. Controllers may differ in their axis configuration, switches, connectors, electrical signals or intended application.
If a supplier offers an alternative part number, ask for confirmation that it replaces 101173GT for your specific machine and serial-number range. A general statement such as “fits Genie boom lifts” is not enough to confirm the correct replacement.
What Should You Check Before Installation?
Have a qualified technician follow the service instructions for the exact machine. Confirm whether the replacement requires any setup, adjustment or calibration rather than assuming it is ready for immediate operation.
After installation, complete the manufacturer’s required function tests before returning the lift to service. If the machine has an existing control fault, follow the prescribed diagnostic procedure before concluding that the joystick itself needs replacement.
Genie 101173GT joystick
Source a Replacement Through RQ Parts
RQ Parts supplies aftermarket aerial work platform parts, including replacement joystick controllers for Genie equipment.
For a 101173GT inquiry, send us your machine model, serial number, original joystick label and clear connector photos. These details help us review the replacement requirements and prepare an accurate quotation.
When ordering, identify the item as a “101173GT dual-axis joystick controller” and confirm its suitability for your machine before shipment.
Reference: JLG Online Express — 101173GT aftermarket joystick listing.